Industrial panel sizing saw blades

LSBX is designed for Industrial panel sizing. Its suitability must be checked against the material, machine and exact variant specifications.

The family is specified for Laminated MDF, Thermoplastic composites, Laminated chipboard, HPL, Plexiglas. Material density, coating, thickness and condition can affect the resulting edge quality. For LSBX, verify the selected reference within its 250–720 mm diameter and 48–96-tooth range.

The catalogue specifies Horizontal panel sizing saws. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For LSBX, verify the selected reference within its 250–720 mm diameter and 48–96-tooth range.

The family uses Dente piano-trapezio 15° tooth geometry. Refer to the technical note for the carbide grade and hook angle. For LSBX, verify the selected reference within its 250–720 mm diameter and 48–96-tooth range.

There are 156 variants, with diameters from 250 to 720 mm, bores from 30 to 100 mm and tooth counts from 48 to 96. For LSBX, verify the selected reference within its 250–720 mm diameter and 48–96-tooth range.

For LSBX, start with the machine bore (30–100 mm) and the required diameter (250–720 mm). Then select within the available 48–96-tooth range by comparing kerf, plate thickness and any pin holes or keyways.

The correct speed for an LSBX blade depends on the selected diameter, which ranges from 250 to 720 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.

A specialist can assess and resharpen the Dente piano-trapezio carbide teeth used by LSBX, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.