Professional circular saw bladesFreud
Freud LU1I professional circular saw blade family with 9 verified configurations from 200 to 350 mm.
Application
The LU1I range includes 9 configurations, with diameters from 200 to 350 mm, bore sizes from 20 to 30 mm and tooth counts from 64 to 112. Use the dimensional selector to identify compatible codes, then compare kerf, plate thickness and pin-hole pattern.
Technical note
H00K carbide, ATB tooth geometry, 20° tooth angle, 10° hook angle. Check blade diameter, bore, flange or pin-hole pattern and maximum RPM against the machine specifications before fitting.
Compatibility at a glance
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Shared family specifications, kept separate from the dimensions of each individual code.
H00K carbide, ATB tooth geometry, 20° tooth angle.
Specially formulated carbide tips for durability and cutting quality.
Coating designed to reduce friction, heat and material build-up.
Technology designed to reduce vibration and noise.
Operating parameters
The chart shows how the recommended speed changes across the LU1I range.
Rotational speed
The actual speed must remain within the limits of both the blade and the machine.
Essential check: before fitting the blade, check its diameter, bore, pin-hole pattern, direction of rotation and the maximum RPM marked on the blade.
Dimensional selector
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | NL / KN | Article no. |
|---|---|---|---|---|---|---|---|
| LU1I0100 | 200 | 3 | 2.5 | 30 | 64 | 2/7/42 | F03FS04673 |
| LU1I0200 | 250 | 3 | 2.5 | 20 | 80 | 2/6/32 | F03FS04675 |
| LU1I0300 | 250 | 3 | 2.5 | 30 | 80 | FT02 | F03FS04677 |
| LU1I0400 | 250 | 3 | 2.5 | 30 | 96 | FT02 | F03FS04679 |
| LU1I0500 | 275 | 3 | 2.5 | 20 | 84 | 2/6/32 | F03FS04681 |
| LU1I0600 | 300 | 3 | 2.5 | 30 | 96 | FT02 | F03FS04682 |
| LU1I0700 | 300 | 3 | 2.5 | 30 | 112 | FT02 | F03FS04684 |
| LU1I0800 | 330 | 3.5 | 3 | 30 | 96 | FT02 | F03FS04686 |
| LU1I0900 | 350 | 3.5 | 3 | 30 | 108 | FT02 | F03FS04688 |
Before choosing
Once LU1I has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
Permitted diameter, bore and pin holes.
Crosscutting / Picture-frame cutting.
Kerf, plate thickness and tooth count.
Speed and cutting height according to the family charts.
Frequently asked questions
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
LU1I is designed for Crosscutting and Picture-frame cutting. Its suitability must be checked against the material, machine and exact variant specifications.
The family is specified for Softwood, Hardwood, MDF. Material density, coating, thickness and condition can affect the resulting edge quality. For LU1I, verify the selected reference within its 200–350 mm diameter and 64–112-tooth range.
The catalogue specifies Squaring saws, Double mitre saws. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For LU1I, verify the selected reference within its 200–350 mm diameter and 64–112-tooth range.
The family uses ATB 20° tooth geometry. Refer to the technical note for the carbide grade and hook angle. For LU1I, verify the selected reference within its 200–350 mm diameter and 64–112-tooth range.
There are 9 variants, with diameters from 200 to 350 mm, bores from 20 to 30 mm and tooth counts from 64 to 112. For LU1I, verify the selected reference within its 200–350 mm diameter and 64–112-tooth range.
For LU1I, start with the machine bore (20–30 mm) and the required diameter (200–350 mm). Then select within the available 64–112-tooth range by comparing kerf, plate thickness and any pin holes or keyways.
The correct speed for an LU1I blade depends on the selected diameter, which ranges from 200 to 350 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.
A specialist can assess and resharpen the ATB carbide teeth used by LU1I, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.
Guides
The catalogue starts with the tool; the guides start with the cutting problem. If you are still choosing, read these first.
One of the most predictable panels in the cut and one of the most demanding on the cutting edge. Its manufacture explains why.
Open guide 4 min readThe same board behaves like two different materials depending on the direction of cut. Here is how tooth count, hook angle and feed change.
Open guide 6 min readThe one catalogue material in which cutting direction changes everything. Before choosing a blade, determine the direction of the grain.
Open guide