Professional circular saw bladesFreud
Freud LU5A professional circular saw blade family with 29 verified configurations from 200 to 550 mm.
Application
The LU5A range includes 29 configurations, with diameters from 200 to 550 mm, bore sizes from 30 to 50 mm and tooth counts from 54 to 132. Use the dimensional selector to identify compatible codes, then compare kerf, plate thickness and pin-hole pattern.
Technical note
H01K carbide, Triple chip grind (TCG) tooth geometry, 10° tooth angle, 10° hook angle. Check blade diameter, bore, flange or pin-hole pattern and maximum RPM against the machine specifications before fitting.
Compatibility at a glance
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Shared family specifications, kept separate from the dimensions of each individual code.
H01K carbide, Triple chip grind (TCG) tooth geometry, 10° tooth angle.
Specially formulated carbide tips for durability and cutting quality.
Coating designed to reduce friction, heat and material build-up.
Technology designed to reduce vibration and noise.
Operating parameters
The chart shows how the recommended speed changes across the LU5A range.
Rotational speed
The actual speed must remain within the limits of both the blade and the machine.
Essential check: before fitting the blade, check its diameter, bore, pin-hole pattern, direction of rotation and the maximum RPM marked on the blade.
Dimensional selector
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | NL / KN | Article no. |
|---|---|---|---|---|---|---|---|
| LU5A0100 | 200 | 2.8 | 2.2 | 30 | 54 | — | F03FS05181 |
| LU5A0200 | 250 | 3.5 | 3 | 30 | 60 | FT02 | F03FS05182 |
| LU5A0300 | 250 | 3.5 | 3 | 32 | 60 | 2/11/63 | F03FS05183 |
| LU5A0400 | 275 | 3.5 | 3 | 40 | 68 | 2/9/55 + 4/12/64 | F03FS05185 |
| LU5A0500 | 300 | 3.5 | 3 | 30 | 72 | FT02 | F03FS05186 |
| LU5A0600 | 300 | 3.5 | 3 | 32 | 72 | 2/11/63 | F03FS05187 |
| LU5A0800 | 330 | 3.5 | 3 | 30 | 84 | FT02 | F03FS05190 |
| LU5A0900 | 330 | 3.5 | 3 | 32 | 84 | 2/11/63 | F03FS05192 |
| LU5A1000 | 350 | 3.5 | 3 | 30 | 84 | FT02 | F03FS05193 |
| LU5A1100 | 350 | 3.5 | 3 | 32 | 84 | 2/11/63 | F03FS05194 |
| LU5A1200 | 350 | 3.5 | 3 | 40 | 84 | 2/9/55 + 4/12/64 | F03FS05196 |
| LU5A1300 | 370 | 3.5 | 3 | 30 | 90 | — | F03FS05197 |
| LU5A1400 | 370 | 3.5 | 3 | 50 | 90 | 4/15/80 | F03FS05198 |
| LU5A1500 | 380 | 3.5 | 3 | 32 | 96 | 2/11/63 | F03FS05199 |
| LU5A1600 | 400 | 3.5 | 3 | 30 | 96 | 2/11/63 | F03FS05200 |
| LU5A1700 | 400 | 3.5 | 3 | 32 | 96 | 2/11/63 | F03FS05202 |
| LU5A1800 | 400 | 3.5 | 3 | 40 | 96 | 2/12/64 + 2/15/80 | F03FS05205 |
| LU5A1900 | 400 | 3.5 | 3 | 50 | 96 | 4/15/80 | F03FS05206 |
| LU5A2000 | 420 | 3.5 | 3 | 30 | 96 | 2/11/70 | F03FS05207 |
| LU5A2100 | 450 | 4 | 3.2 | 30 | 108 | 2/11/63 | F03FS05208 |
| LU5A2200 | 450 | 4 | 3.2 | 32 | 108 | 2/11/63 | F03FS05210 |
| LU5A2300 | 450 | 4 | 3.2 | 40 | 108 | 2/12/64 + 2/15/80 | F03FS08047 |
| LU5A2400 | 450 | 4 | 3.2 | 50 | 108 | 4/15/80 | F03FS07420 |
| LU5A2500 | 500 | 4 | 3.2 | 30 | 120 | 2/10,5/70 | F03FS05212 |
| LU5A2600 | 500 | 4 | 3.2 | 32 | 120 | 2/11/63 | F03FS05214 |
| LU5A2700 | 500 | 4 | 3.2 | 50 | 120 | 4/15/80 | F03FS08244 |
| LU5A2800 | 530 | 4.2 | 3.5 | 30 | 126 | 2/10,5/70 | F03FS06607 |
| LU5A2900 | 550 | 4.2 | 3.5 | 30 | 132 | 2/10,5/70 | F03FS06608 |
| LU5A3000 | 500 | 4.4 | 3.5 | 30 | 120 | — | F03FS07543 |
Before choosing
Once LU5A has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
Permitted diameter, bore and pin holes.
Cutting non-ferrous metals.
Kerf, plate thickness and tooth count.
Speed and cutting height according to the family charts.
Frequently asked questions
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
LU5A is designed for Cutting non-ferrous metals. Its suitability must be checked against the material, machine and exact variant specifications.
The family is specified for Aluminium, Copper and brass. Material density, coating, thickness and condition can affect the resulting edge quality. For LU5A, verify the selected reference within its 200–550 mm diameter and 54–132-tooth range.
The catalogue specifies Double mitre saws, CNC units. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For LU5A, verify the selected reference within its 200–550 mm diameter and 54–132-tooth range.
The family uses Dente piano trapezio 10° tooth geometry. Refer to the technical note for the carbide grade and hook angle. For LU5A, verify the selected reference within its 200–550 mm diameter and 54–132-tooth range.
There are 29 variants, with diameters from 200 to 550 mm, bores from 30 to 50 mm and tooth counts from 54 to 132. For LU5A, verify the selected reference within its 200–550 mm diameter and 54–132-tooth range.
For LU5A, start with the machine bore (30–50 mm) and the required diameter (200–550 mm). Then select within the available 54–132-tooth range by comparing kerf, plate thickness and any pin holes or keyways.
The correct speed for an LU5A blade depends on the selected diameter, which ranges from 200 to 550 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.
A specialist can assess and resharpen the Dente piano trapezio carbide teeth used by LU5A, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.
Guides
The catalogue starts with the tool; the guides start with the cutting problem. If you are still choosing, read these first.