Professional circular saw bladesFreud
Freud saw blades for ripping and multiripping softwood and hardwood on squaring saws and multiripping machines.
Application
LU1D comprises seven blades for ripping and multiripping softwood and hardwood, including timber with loose knots. Diameters range from 250 to 350 mm, with 30, 60 and 70 mm bores and 24 to 32 teeth.
Technical note
H01K carbide with a 10° ATB tooth geometry and positive hook angle. Variants with 60 or 70 mm bores and 4CH 21x5 keyways require careful checks of the spindle, flanges and drive system, as well as diameter, kerf and permitted speed.
Compatibility at a glance
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Shared family specifications, kept separate from the dimensions of each individual code.
H01K carbide, 10° ATB tooth geometry and positive hook angle.
Specially formulated carbide tips for durability and cutting quality.
Coating designed to reduce friction, heat and material build-up.
Technology designed to reduce vibration and noise.
Operating parameters
The charts show how the recommended speed and cutting capacity change across the LU1D range.
Rotational speed
The actual speed must remain within the limits of both the blade and the machine.
Cutting capacity
This is a family-level reference; actual clearance and capacity also depend on the machine.
Essential check: before fitting the blade, check its diameter, bore, pin-hole pattern, direction of rotation and the maximum RPM marked on the blade.
Dimensional selector
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | NL / KN | Article no. |
|---|---|---|---|---|---|---|---|
| LU1D0100 | 250 | 3.2 | 2.2 | 30 | 24 | FT01 | F03FS04615 |
| LU1D0200 | 250 | 3.2 | 2.2 | 70 | 24 | 4CH 21x5 | F03FS04617 |
| LU1D0500 | 300 | 3.2 | 2.2 | 30 | 28 | FT01 | F03FS04620 |
| LU1D0600 | 300 | 3.2 | 2.2 | 60 | 28 | 4CH 21x5 | F03FS04622 |
| LU1D0800 | 300 | 3.2 | 2.2 | 70 | 28 | 4CH 21x5 | F03FS04624 |
| LU1D1000 | 350 | 3.5 | 2.5 | 70 | 32 | 4CH 21x5 | F03FS04626 |
| LU1D1100 | 350 | 3.5 | 2.5 | 30 | 32 | FT02 | F03FS04628 |
Before choosing
Once LU1D has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
Permitted diameter, bore and pin holes.
Ripping / Multiripping.
Kerf, plate thickness and tooth count.
Speed and cutting height according to the family charts.
Frequently asked questions
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
LU1D is intended for ripping and multiripping softwood and hardwood, including timber with loose knots, on compatible squaring saws and multiripping machines.
Both are ripping families, but LU1D focuses on 250–350 mm diameters and includes several 60 and 70 mm bore configurations. Machine dimensions and the drive system determine the correct choice.
Check blade diameter, central bore, pin holes or keyways, kerf and tooth count. The selector narrows the seven codes by diameter and bore. For LU1D, verify the selected reference within its 250–350 mm diameter and 24–32-tooth range.
ATB means alternate top bevel. LU1D uses H01K carbide and a positive hook angle for efficient ripping.
It identifies four 21 x 5 mm drive keyways. They do not replace the central bore; both features must match the spindle and flanges. For LU1D, verify the selected reference within its 250–350 mm diameter and 24–32-tooth range.
FT01 includes 2/7/42 + 2/9/46.4 + 2/10/60; FT02 includes 2/9/46.4 + 2/10/60. These additional pin-hole patterns must be checked before fitting. For LU1D, verify the selected reference within its 250–350 mm diameter and 24–32-tooth range.
The recommended speed depends on diameter. Consult the family chart and always comply with the limit marked on the blade and the machine maximum. For LU1D, verify the selected reference within its 250–350 mm diameter and 24–32-tooth range.
A specialist can resharpen the carbide teeth while preserving geometry, angles and balance, after checking the blade body for damage. For LU1D, verify the selected reference within its 250–350 mm diameter and 24–32-tooth range.
Guides
The catalogue starts with the tool; the guides start with the cutting problem. If you are still choosing, read these first.
Three checks on the machine, not one: maximum blade diameter, spindle bore and drive-pin pattern.
Open guide 6 min readThe one catalogue material in which cutting direction changes everything. Before choosing a blade, determine the direction of the grain.
Open guide