Circular saw blades for portable machinesFreud
Freud FRLPI professional circular saw blade family with 7 verified configurations from 140 to 190 mm.
Application
The FRLPI range includes 7 configurations, with diameters from 140 to 190 mm, bore sizes from 20 to 30 mm and tooth counts from 42 to 60. Use the dimensional selector to identify compatible codes, then compare kerf, plate thickness and pin-hole pattern.
Technical note
HW H00K carbide, ATB tooth geometry, Negative hook angle. Check blade diameter, bore, flange or pin-hole pattern and maximum RPM against the machine specifications before fitting.
Compatibility at a glance
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Shared family specifications, kept separate from the dimensions of each individual code.
HW H00K carbide, ATB tooth geometry.
Specially formulated carbide tips for durability and cutting quality.
Technology used across this blade family.
Technology designed to reduce vibration and noise.
Dimensional selector
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | NL / KN | Tooth | Article no. |
|---|---|---|---|---|---|---|---|---|
| FR04L001H | 140 | 1.8 | 1.3 | 20 | 42 | 2/6/32,5 | ATB -5° | F03FS09797 |
| FR06L001H | 160 | 2.2 | 1.6 | 20 | 48 | 2/6/32,5 | ATB -5° | F03FS09798 |
| FR06L002H | 160 | 2.2 | 1.6 | 20 | 48 | — | ATB -5° | F03FS09799 |
| FR06L003HC | 160 | 1.8 | 1.2 | 20 | 48 | — | ATB -5° | F03FS10075 |
| FR07L001H | 165 | 2.6 | 1.6 | 20 | 48 | 2/6/32,5 | ATB -5° | F03FS09800 |
| FR12L001H | 185 | 2.4 | 1.6 | 20 | 60 | — | ATB -5° | F03FS09801 |
| FR13L001H | 190 | 2.6 | 1.6 | 30 | 60 | 2/7/42 | ATB -5° | F03FS09802 |
Before choosing
Once FRLPI has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
Permitted diameter, bore and pin holes.
Ripping / Crosscutting.
Kerf, plate thickness and tooth count.
Speed and cutting height according to the family charts.
Frequently asked questions
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
FRLPI is designed for Ripping and Crosscutting. Its suitability must be checked against the material, machine and exact variant specifications.
The family is specified for MDF, Chipboard, Laminated MDF, Laminated chipboard. Material density, coating, thickness and condition can affect the resulting edge quality. For FRLPI, verify the selected reference within its 140–190 mm diameter and 42–60-tooth range.
The catalogue specifies Hand-held circular saws, Plunge saws. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For FRLPI, verify the selected reference within its 140–190 mm diameter and 42–60-tooth range.
The family uses ATB tooth geometry. Refer to the technical note for the carbide grade and hook angle. For FRLPI, verify the selected reference within its 140–190 mm diameter and 42–60-tooth range.
There are 7 variants, with diameters from 140 to 190 mm, bores from 20 to 30 mm and tooth counts from 42 to 60. For FRLPI, verify the selected reference within its 140–190 mm diameter and 42–60-tooth range.
For FRLPI, start with the machine bore (20–30 mm) and the required diameter (140–190 mm). Then select within the available 42–60-tooth range by comparing kerf, plate thickness and any pin holes or keyways.
The correct speed for an FRLPI blade depends on the selected diameter, which ranges from 140 to 190 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.
A specialist can assess and resharpen the ATB carbide teeth used by FRLPI, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.
Guides
The catalogue starts with the tool; the guides start with the cutting problem. If you are still choosing, read these first.