Circular saw blades for portable machinesFreud
Freud FRHBC professional circular saw blade family with 2 verified configurations from 250 to 300 mm.
Application
The FRHBC range includes 2 configurations, with diameters from 250 to 300 mm, bore sizes from 30 to 30 mm and tooth counts from 80 to 96. Use the dimensional selector to identify compatible codes, then compare kerf, plate thickness and pin-hole pattern.
Technical note
HW H00K carbide, HLTCG tooth geometry, Positive hook angle. Check blade diameter, bore, flange or pin-hole pattern and maximum RPM against the machine specifications before fitting.
Compatibility at a glance
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Shared family specifications, kept separate from the dimensions of each individual code.
HW H00K carbide, HLTCG tooth geometry.
Specially formulated carbide tips for durability and cutting quality.
Technology used across this blade family.
Technology designed to reduce vibration and noise.
Dimensional selector
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | NL / KN | Tooth | Article no. |
|---|---|---|---|---|---|---|---|---|
| FR23H001T | 250 | 2.8 | 1.8 | 30 | 80 | FT121 | HLTCG 10° | F03FS09877 |
| FR28H001T | 300 | 3.2 | 2.2 | 30 | 96 | FT121 | HLTCG 10° | F03FS09878 |
Before choosing
Once FRHBC has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
Permitted diameter, bore and pin holes.
Ripping / Crosscutting.
Kerf, plate thickness and tooth count.
Speed and cutting height according to the family charts.
Frequently asked questions
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
FRHBC is designed for Ripping and Crosscutting. Its suitability must be checked against the material, machine and exact variant specifications.
The family is specified for HPL, Polymeric materials. Material density, coating, thickness and condition can affect the resulting edge quality. For FRHBC, verify the selected reference within its 250–300 mm diameter and 80–96-tooth range.
The catalogue specifies Table saws. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For FRHBC, verify the selected reference within its 250–300 mm diameter and 80–96-tooth range.
The family uses HLTCG tooth geometry. Refer to the technical note for the carbide grade and hook angle. For FRHBC, verify the selected reference within its 250–300 mm diameter and 80–96-tooth range.
There are 2 variants, with diameters from 250 to 300 mm, bores from 30 to 30 mm and tooth counts from 80 to 96. For FRHBC, verify the selected reference within its 250–300 mm diameter and 80–96-tooth range.
For FRHBC, start with the machine bore (30–30 mm) and the required diameter (250–300 mm). Then select within the available 80–96-tooth range by comparing kerf, plate thickness and any pin holes or keyways.
The correct speed for an FRHBC blade depends on the selected diameter, which ranges from 250 to 300 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.
A specialist can assess and resharpen the HLTCG carbide teeth used by FRHBC, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.
Guides
The catalogue starts with the tool; the guides start with the cutting problem. If you are still choosing, read these first.