HW DP
10°
TCG
DP carbide, TCG tooth geometry.
Circular saw blades for portable machinesFreud
FRFPIB
Saw blades for cordless hand-held and plunge saws cutting fibre cement
Freud FRFPIB professional circular saw blade family with 5 verified configurations from 140 to 190 mm.
Ø 140–190 mm
Z 4
Bore 20–30 mm
Ref · FRFPIB
5 codes
- Machines
- Hand-held circular saws, Plunge saws
- Materials
- Fibre cement, Plasterboard
- Applications
- Cutting fibre cement
- Range
- 5 verified codes
Application
When to choose FRFPIB
The FRFPIB range includes 5 configurations, with diameters from 140 to 190 mm, bore sizes from 20 to 30 mm and tooth counts from 4 to 4. Use the dimensional selector to identify compatible codes, then compare kerf, plate thickness and pin-hole pattern.
- Application
- Cutting fibre cement
- Material
- Fibre cement
- Material
- Plasterboard
Technical note
DP carbide, TCG tooth geometry, Positive hook angle. Check blade diameter, bore, flange or pin-hole pattern and maximum RPM against the machine specifications before fitting.
Compatibility at a glance
Machines and materials
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Tooth geometry and technologies
Shared family specifications, kept separate from the dimensions of each individual code.
Diamante Policristallino
Technology used across this blade family.
Perma-SHIELD
Technology used across this blade family.
Anti-vibration
Technology designed to reduce vibration and noise.
Dimensional selector
Find the correct product code
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | NL / KN | Tooth | Article no. |
|---|---|---|---|---|---|---|---|---|
| FR04F001H | 140 | 1.8 | 1.3 | 20 | 4 | 2/6/32,5 | TCG 10° | F03FS09836 |
| FR06F001H | 160 | 2.2 | 1.6 | 20 | 4 | 2/6/32,5 | TCG 10° | F03FS09837 |
| FR06F002HC | 160 | 1.8 | 1.2 | 20 | 4 | — | TCG 10° | F03FS10095 |
| FR07F002HC | 165 | 1.8 | 1.2 | 20 | 4 | — | TCG 10° | F03FS10096 |
| FR13F003HC | 190 | 1.8 | 1.2 | 30 | 4 | — | TCG 10° | F03FS10097 |
Before choosing
The blade family is only the first step
Once FRFPIB has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
-
1
Check the machine
Permitted diameter, bore and pin holes.
-
2
Confirm the application
Cutting fibre cement.
-
3
Choose the variant
Kerf, plate thickness and tooth count.
-
4
Check the operating parameters
Speed and cutting height according to the family charts.
Frequently asked questions
Questions about the FRFPIB family
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
01 What is the FRFPIB family designed for?
FRFPIB is designed for Cutting fibre cement. Its suitability must be checked against the material, machine and exact variant specifications.
02 Which materials can FRFPIB cut?
The family is specified for Fibre cement, Plasterboard. Material density, coating, thickness and condition can affect the resulting edge quality. For FRFPIB, verify the selected reference within its 140–190 mm diameter and 4-tooth range.
03 Which machines can use FRFPIB blades?
The catalogue specifies Hand-held circular saws, Plunge saws. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For FRFPIB, verify the selected reference within its 140–190 mm diameter and 4-tooth range.
04 What tooth geometry does FRFPIB use?
The family uses TCG tooth geometry. Refer to the technical note for the carbide grade and hook angle. For FRFPIB, verify the selected reference within its 140–190 mm diameter and 4-tooth range.
05 How many FRFPIB variants are available?
There are 5 variants, with diameters from 140 to 190 mm, bores from 20 to 30 mm and tooth counts from 4 to 4. For FRFPIB, verify the selected reference within its 140–190 mm diameter and 4-tooth range.
06 How do I select the correct FRFPIB code?
For FRFPIB, start with the machine bore (20–30 mm) and the required diameter (140–190 mm). Then select within the available 4–4-tooth range by comparing kerf, plate thickness and any pin holes or keyways.
07 At what speed should a FRFPIB blade run?
The correct speed for an FRFPIB blade depends on the selected diameter, which ranges from 140 to 190 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.
08 Can FRFPIB blades be resharpened?
A specialist can assess and resharpen the TCG carbide teeth used by FRFPIB, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.
Guides
Guides related to this blade family
The catalogue starts with the tool; the guides start with the cutting problem. If you are still choosing, read these first.