Circular saw blades for portable machinesFreud
Freud FRXP professional circular saw blade family with 10 verified configurations from 160 to 355 mm.
Application
The FRXP range includes 10 configurations, with diameters from 160 to 355 mm, bore sizes from 20 to 30 mm and tooth counts from 30 to 80. Use the dimensional selector to identify compatible codes, then compare kerf, plate thickness and pin-hole pattern.
Technical note
HW TF30 carbide, HLTCG tooth geometry, a 0° hook angle. Check blade diameter, bore, flange or pin-hole pattern and maximum RPM against the machine specifications before fitting.
Compatibility at a glance
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Shared family specifications, kept separate from the dimensions of each individual code.
HW TF30 carbide, HLTCG tooth geometry.
Specially formulated carbide tips for durability and cutting quality.
Technology used across this blade family.
Technology designed to reduce vibration and noise.
Dimensional selector
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | NL / KN | Tooth | Article no. |
|---|---|---|---|---|---|---|---|---|
| FR06X001H | 160 | 2 | 1.6 | 20 | 30 | 2/6/32,5 | HLTCG 0° | F03FS09852 |
| FR07X001H | 165 | 2 | 1.6 | 20 | 30 | 2/6/32,5 | HLTCG 0° | F03FS09853 |
| FR13X001H | 190 | 2 | 1.6 | 30 | 36 | 2/7/42 | HLTCG 0° | F03FS09854 |
| FR15X001H | 210 | 2.4 | 2 | 30 | 36 | 2/7/42 | HLTCG 0° | F03FS09855 |
| FR19X001H | 230 | 2.2 | 1.8 | 30 | 48 | 2/7/42 | HLTCG 0° | F03FS09856 |
| FR20X001H | 235 | 2.2 | 1.8 | 30 | 50 | 2/7/42 | HLTCG 0° | F03FS09857 |
| FR22X001H | 240 | 2.6 | 1.6 | 30 | 48 | 2/7/42 | HLTCG 0° | F03FS09858 |
| FR27X001H | 270 | 2.4 | 2 | 30 | 60 | 2/7/42 | HLTCG 0° | F03FS09859 |
| FR32X001H | 350 | 2.9 | 2.5 | 30 | 60 | 2/7/42 | HLTCG 0° | F03FS09861 |
| FR33X001H | 355 | 2.6 | 2.2 | 30 | 80 | 2/7/42 | HLTCG 0° | F03FS09862 |
Before choosing
Once FRXP has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
Permitted diameter, bore and pin holes.
Crosscutting / Cutting ferrous metals.
Kerf, plate thickness and tooth count.
Speed and cutting height according to the family charts.
Frequently asked questions
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
FRXP is designed for Crosscutting and Cutting ferrous metals. Its suitability must be checked against the material, machine and exact variant specifications.
The family is specified for Sandwich panels. Material density, coating, thickness and condition can affect the resulting edge quality. For FRXP, verify the selected reference within its 160–355 mm diameter and 30–80-tooth range.
The catalogue specifies Hand-held circular saws. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For FRXP, verify the selected reference within its 160–355 mm diameter and 30–80-tooth range.
The family uses HLTCG tooth geometry. Refer to the technical note for the carbide grade and hook angle. For FRXP, verify the selected reference within its 160–355 mm diameter and 30–80-tooth range.
There are 10 variants, with diameters from 160 to 355 mm, bores from 20 to 30 mm and tooth counts from 30 to 80. For FRXP, verify the selected reference within its 160–355 mm diameter and 30–80-tooth range.
For FRXP, start with the machine bore (20–30 mm) and the required diameter (160–355 mm). Then select within the available 30–80-tooth range by comparing kerf, plate thickness and any pin holes or keyways.
The correct speed for an FRXP blade depends on the selected diameter, which ranges from 160 to 355 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.
A specialist can assess and resharpen the HLTCG carbide teeth used by FRXP, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.