Circular saw blades for portable machinesFreud
Freud FRATB professional circular saw blade family with 3 verified configurations from 216 to 305 mm.
Application
The FRATB range includes 3 configurations, with diameters from 216 to 305 mm, bore sizes from 30 to 30 mm and tooth counts from 66 to 96. Use the dimensional selector to identify compatible codes, then compare kerf, plate thickness and pin-hole pattern.
Technical note
HW H01K carbide, HLTCG tooth geometry, a 0° hook angle. Check blade diameter, bore, flange or pin-hole pattern and maximum RPM against the machine specifications before fitting.
Compatibility at a glance
01 Compatible machines
02 Suitable materials
Always check the pin-hole pattern
Technical configuration
Shared family specifications, kept separate from the dimensions of each individual code.
HW H01K carbide, HLTCG tooth geometry.
Specially formulated carbide tips for durability and cutting quality.
Technology used across this blade family.
Technology designed to reduce vibration and noise.
Dimensional selector
Filter the variants by the two key dimensions, then compare kerf, plate thickness, tooth count and pin-hole patterns.
| Code | Ø mm | Kerf B | Plate b | Bore d | Teeth Z | Tooth | Article no. |
|---|---|---|---|---|---|---|---|
| FR16A002MC | 216 | 2 | 1.4 | 30 | 66 | HLTCG 0° | F03FS10089 |
| FR23A002MC | 250 | 2.4 | 1.8 | 30 | 78 | HLTCG 0° | F03FS10090 |
| FR29A004MC | 305 | 2.4 | 1.8 | 30 | 96 | HLTCG 0° | F03FS10091 |
Before choosing
Once FRATB has been identified, the exact product code depends on the machine requirements. The portal keeps these two decisions separate.
Permitted diameter, bore and pin holes.
Cutting plastic materials / Cutting non-ferrous metals.
Kerf, plate thickness and tooth count.
Speed and cutting height according to the family charts.
Frequently asked questions
Quick answers for checking the application, compatibility and operating parameters before selecting a product code.
FRATB is designed for Cutting plastic materials and Cutting non-ferrous metals. Its suitability must be checked against the material, machine and exact variant specifications.
The family is specified for Plastic materials, Aluminium, Copper and brass. Material density, coating, thickness and condition can affect the resulting edge quality. For FRATB, verify the selected reference within its 216–305 mm diameter and 66–96-tooth range.
The catalogue specifies Mitre saws. Before fitting, check diameter, bore, flange or pin-hole pattern and the permitted maximum speed. For FRATB, verify the selected reference within its 216–305 mm diameter and 66–96-tooth range.
The family uses HLTCG tooth geometry. Refer to the technical note for the carbide grade and hook angle. For FRATB, verify the selected reference within its 216–305 mm diameter and 66–96-tooth range.
There are 3 variants, with diameters from 216 to 305 mm, bores from 30 to 30 mm and tooth counts from 66 to 96. For FRATB, verify the selected reference within its 216–305 mm diameter and 66–96-tooth range.
For FRATB, start with the machine bore (30–30 mm) and the required diameter (216–305 mm). Then select within the available 66–96-tooth range by comparing kerf, plate thickness and any pin holes or keyways.
The correct speed for an FRATB blade depends on the selected diameter, which ranges from 216 to 305 mm, and on the machine. Never exceed the lower of the maximum RPM marked on that blade and the machine manufacturer’s limit.
A specialist can assess and resharpen the HLTCG carbide teeth used by FRATB, provided the blade body is undamaged. The original geometry, angles and balance must be preserved; the number of possible services depends on the condition of the selected reference.